manualshive.com logo in svg

HP auroraTempo, User Manual

Share
Download
HP auroraTempo User Manual Download Page 59

Issue 1a - 10/99

4-11

Physical Testing

Resetting the Counters

aurora

Tempo

 starts maintaining the counters as soon as the

interface is assigned. To reset the statistical counters back to
zero :

•

Press MENU to display the 

Physical status

 menu.

•

Choose the 

Reset Stats

 option. The counters are reset

to zero.

Status at a Glance!

aurora

Tempo

 shows you at a glance if anything has changed

since the counters were last reset. A highlighted box is placed
around what has changed (and the red L1 HIST LED lights
up for the T1, E1 and DDS interfaces).

For example, if an  RCL (Loss of signal) alarm occurs after
resetting the counters the following is shown :

Removing the highlighting

•

Choose the 

Reset History

 function key. Any

highlighting disappears.

Summary of Contents for auroraTempo













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands