manualshive.com logo in svg

HP auroraTempo, User Manual

Share
Download
HP auroraTempo User Manual Download Page 204

aurora

Tempo

 - User Guide

7-2

  423972

Working with the File Manager

This chapter describes how to use the File Manager. This is
the facility aurora

Tempo

 provides to display and work with

stored files held in memory.

You can work with the following types of file using the File
Manager :

•

Frame Relay traffic, test results and statistics files

•

Bert results from physical testing

•

Line rate results

•

Configuration files

•

Filters

•

Triggers

You can store up to a maximum of 100 files in aurora

Tempo

’s

memory.

Accessing the File Manager

You can access the File Manager in one of two ways :

•

Choose 

File Manager 

from the Main Menu or

•

Press the SHIFT and FILE keys simultaneously.

The following window and menu are displayed :

File statistics

Summary of Contents for auroraTempo













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands