HP auroraTempo User Manual Download Page 187

Page: 187 / 300

Issue 1a - 10/99

6-9

Configuring aurora

Tempo

Each timeslot is represented by a box. The following symbols
are used within these boxes to indicate the status of each of
the timeslots :

The timeslot is not assigned to the interface.

✓

The timeslot is assigned to the interface.

•

Use the arrow cursor keys to move the highlighted box
to select a different timeslot. The

Current Slot

displayed at the right hand side of the window.

Note

When you switch on CAS it uses timeslot 16, and

CAS

displayed in timeslot 16 on the slot map. This means that
you cannot assign timeslot 16.

Assigning a timeslot

•

To assign a timeslot, press ENTER or F1

Assign

Timeslot

- the highlighted timeslot is assigned to the

interface and

✓

is displayed in the box.

•

To assign all the timeslots, press F2

Assign All

Timeslots

Deselecting a timeslot

•

To deselect a timeslot, press ENTER or F1

Clear

Timeslot

- the highlighted timeslot is deassigned from

the interface and

is displayed in the box.

•

To deselect all the timeslots, press F3

Clear All

Timeslots

Saving your selections

•

Press

F6 Save And Exit

to save and exit the timeslot

window.

Summary of Contents for auroraTempo













































































































































































































































































































Search results

Summary of Contents for auroraTempo

Reviews:

Brands by name

Popular brands

HP auroraTempo, User Manual

Search results

Summary of Contents for auroraTempo

Reviews:

Brands by name

Popular brands