HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual Download Page 20 | Manualshive

Page: 20 / 144

background image

20

Overview

Information Base (MIB). Fabric OS 6.x supports the latest Fibre Alliance Fibre Channel Management

(FCMGMT) and Storage Management Initiative (SMI) MIBs. These MIBs provide the SAN administrator

with information for monitoring the network. Refer to the

Fabric OS MIB Reference

Guide

.

Optional software licenses

Table 4

lists the DC Director optional software kits.

Table 4

DC Director orderable software

Optional kit

Part number

HP StorageWorks DC SAN Backbone Director ICL

Bundle Kit

This optional kit increases the number of ports using four

inter-chassis links (ICLs), or cables, that interconnect a

maximum of two DC Director chassis.
Each ICL Bundle Kit contains:

•

Four, two meter copper cables

•

Two ICL Licenses (one license required for each DC

Director)

AK862A

HP StorageWorks Director FICON Cup LTU*

Provides Control Unit Port (CUP) management function
designed to allow mainframe applications to perform
configuration, monitoring, management and statistics
collection.

*

Supported in XP Storage array environments only

Note:

Contact your local HP representative for information

on exact Fabric OS versions supported.

T4401A

HP StorageWorks MP Blade Performance

Extension LTU

Activates the high performance extension services for either IP

or FC connectivity in the B-Series MP Router Blade (FR4-18i).

IP and FC extension services are mutually exclusive. This

option also includes the Encryption Services license.

T4427A

HP StorageWorks Enterprise Edition version 5

Fabric Manager Software

Fabric Manager is a highly scalable, Java-based Graphical

User Interface (GUI) application that manages multiple

switches and multiple fabrics (up to eight) in real time.

Provides SAN administrators with an interface for

configuring, monitoring, and dynamic provisioning.

T4270A, Fabric Manager, v5.x Base, ten
domains
T4269A, Fabric Manager, v5.x Enterprise
200 domains, eight fabrics
T4272A, Fabric Manager, v4 Enterprise to
v5.x Enterprise upgrade
T4273A, Fabric Manager v5 base to v5.x
enterprise upgrade license
T4271A, Fabric Manager, v4 Base to v5.x

Base upgrade

«
...
18
19
20
21
22
...
»

Summary of Contents for A7990A - StorageWorks SAN Director 4/16 Blade Switch

















































































































































Reviews:

No comments

Related manuals for A7990A - StorageWorks SAN Director 4/16 Blade Switch

Brand: JDS Uniphase Pages: 40

Brand: N-Tron Pages: 2

PARAGON II Series

Brand: Raritan Pages: 1

Paragon Manager

Brand: Raritan Pages: 117

Temperature SWICHGAGE SPL

Brand: Murphy Pages: 4

Brand: DITEC Pages: 8

Brand: Atlantis Land Pages: 3

AMX ENOVA DVX-3250HD-SP

Brand: Harman Pages: 119

Brand: Pathway connectivity solutions Pages: 34

CEFLA PIR DALIP

Brand: DANLERS Pages: 2

Brand: ATEN Pages: 4

Brand: Edge-Core Pages: 65

EdgeSwitch 8 150W

Brand: Ubiquiti Pages: 28

Brand: Zektor Pages: 41

Brand: Radio Shack Pages: 8

Lanolinx LNX-1002GN

Brand: ANTAIRA Pages: 110

Brand: Dwyer Instruments Pages: 4

Brand: ATEN Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands