HP 9000 rp3410, User'S & Service Manual

Page: 182 / 254

Chapter 6
Removing and Replacing Components
Removing and Replacing System Memory
182
Step 4. Holding the memory module by its left and right edges, insert the module into the socket. The
memory modules are keyed and can only be inserted in one direction. When the module is correctly
seated, the retainer clips will return to their fully upright position.
Step 5. Firmly and evenly push down on each end of the DIMM until it seats in the socket. Ensure the
extraction levers are in the closed position and snap the clips firmly into place to ensure that the
DIMMs are seated properly.
Figure 6-34 Inserting DIMM into Connector
Step 6. Replace the memory airflow guide. (See “Removing and Replacing the Memory Airflow Guide” on
page 171.)
Step 7. Replace the top cover.
Step 8. Reconnect power and external cables and turn on the server.
Step 9. Verify the memory replacement and operation by using the system utilities. (See the Utilities
chapter or the
HP Integrity and HP 9000 iLO MP Operations Guide for additional information.)
• Use the iLO MP commands to verify operation.
• Use the BCH commands to verify operation.
• Use diagnostics provided by the ODE to exercise the newly installed memory.