'spanning-tree legacy-mode' is the equivalent of executing:
spanning-tree legacy-path-cost
spanning-tree force-version stp-compatible
'no spanning-tree legacy-mode' is the equivalent of executing:
no spanning-tree legacy-path-cost
spanning-tree force-version mstp-operation
legacy-path-cost
■
[no] spanning-tree legacy-path-cost
Set 802.1D (legacy) or 802.1t (not legacy) default pathcost values.
max-hops
■
spanning-tree max-hops
< 1 to 40 >
Set the max number of hops in a region before the MST BPDU is discarded and the
information held for a port is aged (default is 20).
Range: < 1 to 40 >
maximum-age
■
spanning-tree maximum-age
< 6 to 40 >
Set maximum age of received STP information before it is discarded.
Range: < 6 to 40 >
mcheck
■
spanning-tree
[ETHERNET] PORT-LIST
mcheck
Force the port to transmit RST BPDUs.
mode
■
spanning-tree
[ETHERNET] PORT-LIST
mode
< Norm | Fast | Uplink >
Set spanning tree operation mode.
Supported Values:
■
Norm -- Normal spanning tree mode.
■
Fast -- Fast spanning tree mode.
■
Uplink -- Fast Uplink spanning tree mode.
MSTID
■
[no] spanning-tree instance
< 1 to 16 >
ID of the MST instance to configure.
Range: < 1 to 16 >
Next Available Options:
■
-- Configure VLANs for the MST instance.
■
< 0 to 15 > -- Set the device priority for the MST instance (the value is in range of
0-61440 divided into steps of 4096 that are numbered from 0 to 15, default is step 8).
■
-- Configure MST instance ports parameters ([ethernet] PORT-LIST)
645
©
2009 Hewlett-Packard Development Company, L.P.
spanning-tree
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......