HP 6200YL Reference Manual Download Page 532

Page: 532 / 765

Usage: show ip ospf area [OSPF-AREA-ID]

Description: Show OSPF areas configured on the device. Invoked without

parameters displays all OSPF areas configured. If the
'OSPF-AREA-ID' is specified detailed information for
the correspondent OSPF area is shown.

Next Available Option:

■

area-ip

-- (OSPF-AREA-ID)

(p. 530)

■

show ip ospf virtual-neighbor area

OSPF-AREA-ID

Specify area of the virtual neighbors to show.

■

show ip ospf virtual-link area

OSPF-AREA-ID

Specify area of the virtual links to show.

area-id

■

show ip ospf link-state

OSPF-AREA-ID

Show LSAs for the specified area only.

area-ip

■

show ip ospf area

OSPF-AREA-ID

arp

■

show arp

Usage: show arp [vlan VLAN-ID]

Description: Show the IP ARP translation table.

If VLAN-ID is specified, the output is filtered on
the VLAN-ID.

Next Available Option:

■

vlan

-- Specify VLAN for which to show ARP entries. (VLAN-ID)

(p. 603)

arp-protect

■

show arp-protect

Usage: show arp-protect [stats <VLAN-ID-RANGE>]

Description: Display Dynamic ARP Protection information.

Parameters:

o stats - Display ARP Protection VLAN counters.

Next Available Option:

■

statistics

-- (VLAN-ID-RANGE)

(p. 594)

530

2009 Hewlett-Packard Development Company, L.P.

show

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands