Automatic address configuration.
binary-range
■
svlan
VLAN-ID
qos dscp
< 0 to 63 >
Specify the DSCP code-point in binary.
Range: < 0 to 63 >
connection-rate-filter
■
svlan
VLAN-ID
connection-rate-filter
Usage:
connection-rate-filter unblock < host SRC-IP-ADDR | SRC-IP-ADDRESS/mask
>
[no] connection-rate-filter sensitivity <low|medium|high|aggressive>
Description: Re-enables access to a host or set of hosts
that has been previously
blocked by the connection rate filter. Disabling or setting sensitivity
may have improved performance after rebooting the switch
Next Available Option:
■
-- Resets a host previously blocked by the connection rate filter
dhcp
■
[no] svlan
VLAN-ID
ipv6 address dhcp
Configure a DHCPv6 client.
Next Available Option:
■
-- Obtain IPv6 address & Configuration information from DHCPv6 server.
dhcp-bootp
■
svlan
VLAN-ID
ip address dhcp-bootp
Configure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■
[no] svlan
VLAN-ID
dhcp-snooping
direction
■
[no] svlan
VLAN-ID
ip access-group
ACCESS-GROUP < in | out | connection-rate-filter | ... >
Supported Values:
■
in -- Match inbound packets
■
out -- Match outbound packets
■
connection-rate-filter -- Manage packet rates
■
vlan -- VLAN acl
dscp
■
svlan
VLAN-ID
qos dscp
666
©
2009 Hewlett-Packard Development Company, L.P.
svlan
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......