auto
■
ip igmp auto
[ETHERNET] PORT-LIST
Usage: ip igmp auto [ethernet] PORT-LIST
Description: Instruct the device to monitor incoming multicast traffic
on the specified ports (this is the default behavior).
This
feature is configured on a per-VLAN basis.
blackhole
■
[no] ip route
IP-ADDR/MASK-LENGTH
blackhole
Specify that packets are silently discarded with no ICMP message sent.
Next Available Option:
■
< 1 to 255 > -- Set the administrative distance to associate with this static route.
blocked
■
ip igmp blocked
[ETHERNET] PORT-LIST
Usage: ip igmp blocked [ethernet] PORT-LIST
Description: Instruct the device to drop incoming multicast packets
received on the specified ports.
This feature is
configured on a per-VLAN basis.
broadcast-request
■
[no] ip icmp echo broadcast-request
Usage: [no] ip icmp echo broadcast-request
Description: Enable/disable echo replies to broadcast echo requests.
Supported Values:
■
Min
■
Max
burst-normal
■
[no] ip icmp burst-normal
< 0 to 1000000 >
Usage: ip icmp burst-normal <0-1000000>
Description: The maximum number of icmp replies to send per second.
The default value is 1000.
Range: < 0 to 1000000 >
cipher
■
[no] ip ssh cipher
< aes128-cbc | 3des-cbc | aes192-cbc | ... >
Specify a cipher to enable/disable.
Supported Values:
■
aes128-cbc
296
©
2009 Hewlett-Packard Development Company, L.P.
ip
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......