HP 6200YL Reference Manual Download

Page: 373 / 765

disable-timer

■

loop-protect disable-timer

< 0 to 604800 >

Set time in seconds to wait before attempting to reenable a port.

Range: < 0 to 604800 >

loop-detected

■

[no] loop-protect trap loop-detected

generate trap when a loop is detected

port-list

■

[no] loop-protect

[ETHERNET] PORT-LIST

Specify the ports that are to be added to/removed from loop protection.

Next Available Option:

■

receiver-action

< send-disable | no-disable > -- Select action to take when loop protect packets

are received on the specified port(s).

(p. 371)

receiver-action

■

loop-protect

[ETHERNET] PORT-LIST

receiver-action

< send-disable | no-disable >

Select action to take when loop protect packets are received on the specified port(s).

Supported Values:

■

send-disable

■

no-disable

transmit-interval

■

loop-protect transmit-interval

< 1 to 10 >

Set time between packet transmissions.

Range: < 1 to 10 >

trap

■

[no] loop-protect trap

Specify loop protection traps that are to be enabled/disabled.

Next Available Option:

■

loop-detected

-- generate trap when a loop is detected

(p. 371)

371

2009 Hewlett-Packard Development Company, L.P.

loop-protect

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands