HP 6200YL Reference Manual Download Page 218 | Manualshive

Page: 218 / 765

background image

Usage: [no] ip access-group <ACL-ID> <in|out>

in

Match packets this device will route to another VLAN

out

Match packets this device will route onto this VLAN

vlan

Match packets that originate within this VLAN

connection-rate-filter Manage new conection rates originating in this VLAN

Description: Apply the specified access control list on this VLAN interface.

The ACL can match either packets that are routed from this VLAN
to another VLAN, packets that will be routed from another VLAN
to this VLAN, packets that originate on this VLAN, or it can
manage new connection rates for virus throttling.Connection rate
filter ACLs should be applied as connection-rate-filter only.

Next Available Option:

■

< in | out | connection-rate-filter | ... > --

address

■

[no] interface loopback

< 0 to 7 >

ip address

Usage: [no] ip address [IP-ADDR]

Description: Set IP parameters for communication within an IP network.

Each loopback Interface represents an IP interface having

its own unique configuration.

The loopback interface

for which the configuration is applied can be specified
implicitly by preceding the phrase 'ip address' with the
'interface loopback <num>' keyword and argument.

It

can also be called explicitly when called directly from a
Loopback context.

In the latter case the command

affects the interface identified by the context.

Parameters:

o IP-ADDR- Assign an IP address to the loopback interface.

Multiple addresses may be configured on a single loopback interface.

Next Available Option:

■

-- Interface IP address. (IP-ADDR)

■

[no] interface vlan

VLAN-ID

ip address

Usage: [no] ip address [dhcp-bootp|IP-ADDR/mask-LENGTH]

Description: Set IP parameters for communication within an IP network.

Each VLAN represents an IP interface having its own unique
configuration.

The VLAN for which the configuration is

applied can be specified implicitly by preceding the
phrase 'ip address' with the 'vlan VLAN-ID' keyword and
argument.

It can also be called explicitly when called

directly from a VLAN context.

In the latter case the

command affects the VLAN identified by the context.

Parameters:

o dhcp-bootp - The switch attempts to get its configuration from a

216

©

2009 Hewlett-Packard Development Company, L.P.

interface

Command Line Interface Reference Guide

«
...
216
217
218
219
220
...
»

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6200YL

DRAGON NATURALLYSPEAKING 7

Brand: ScanSoft Pages: 222

Brand: MAGIX Pages: 88

Persona Persona M30e

Brand: Fargo Pages: 31

Brand: Bosch Pages: 40

Divar Archive Player

Brand: Bosch Pages: 10

Brand: Bosch Pages: 86

DINION IP 5000 MP

Brand: Bosch Pages: 112

BD DISCRECORDER

Brand: Ulead Pages: 18

ConferenceSuite

Brand: Polycom Pages: 2

CERTIFICATE 7.3 RELEASE NOTES

Brand: Red Hat Pages: 24

Brand: 360 Systems Pages: 58

Brand: AMX Pages: 24

Brand: Cabletron Systems Pages: 232

FLASH REMOTING MX-USING FLASH REMOTING FOR FLASH MX 2004 ACTIONSCRIPT...

Brand: MACROMEDIA Pages: 180

Brand: Echo Audio Pages: 35

Elura 60 - Elura 60 MiniDV Camcorder

Brand: Canon Pages: 89

Media Manager for PSP

Brand: GameShark Pages: 15

Brand: Palm Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands