■
-- Display hexadecimal hash.
icmp
■
show ip icmp
Usage: show ip icmp
Description: Show ICMP Rate Limiting settings.
■
show rate-limit icmp
Show only limits for icmp traffic.
Next Available Options:
■
-- Specify ports for which information will be shown. ([ethernet] PORT-LIST)
■
-- Show Inbound Radius Override details.
if-ip
■
show ip ospf statistics
IP-ADDR
Specify IP address of the interface for which to show detailed information.
■
show ip ospf interface
IP-ADDR
Specify IP address of the interface for which to show detailed information.
■
show ip rip interface
IP-ADDR
Specify IP address of the interface for which to show detailed information.
igmp
■
show igmp
Usage: show igmp [...]
Description: Show global switch IGMP configuration parameters.
To get a list of all possible parameters use 'show igmp ?'.
Next Available Option:
■
-- Shows switch-wide IGMP delayed flush value
■
show ip igmp
Usage: show ip igmp [config|group IP-ADDR|VLAN-ID [config]]
Description: Invoked without any parameters, shows per-VLAN IGMP status,
or, if VLANs are disabled displays the global IGMP status.
When followed by the 'config' keyword, shows IGMP global
configuration information. VLAN-ID can be used to get
operational and configuration information for a particular
VLAN, if VLAN support is enabled. The 'group' keyword can be
used to show a list of ports where a particular multicast group
is registered.
556
©
2009 Hewlett-Packard Development Company, L.P.
show
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......