HP 6200YL Reference Manual Download Page 244

Page: 244 / 765

Specify the IP address the request is for.

Next Available Options:

■

area

-- Specify an OSPF area.

(p. 221)

■

cost

< 1 to 65535 > -- Set metric of this interface.

(p. 229)

■

[no] interface vlan

VLAN-ID

ip address

IP-ADDR/mask-LENGTH

Interface IP address/mask.

■

[no] interface vlan

VLAN-ID

ip bootp-gateway

IP-ADDR

IPv4 address of the BOOTP gateway.

■

[no] interface vlan

VLAN-ID

ip forward-protocol udp

IP-ADDR

IP address of the protocol server.

Next Available Options:

■

port-num

-- UDP port number of the server. (TCP/UDP-PORT)

(p. 263)

■

port-name

< dns | ntp | netbios-ns | ... > -- (NUMBER)

(p. 263)

■

[no] interface vlan

VLAN-ID

ip ospf

IP-ADDR

Specify the IP address the request is for.

Next Available Options:

■

passive

-- Configures an ospf interface as passive.

(p. 258)

■

area

-- Specify an OSPF area.

(p. 221)

■

authentication-key

-- Set simple authentication method and key.

(p. 223)

■

authentication

-- Disable authentication.

(p. 223)

■

md5-auth-key-chain

-- Set MD5 authentication method and key chain.

(p. 250)

■

cost

< 1 to 65535 > -- Set metric of this interface.

(p. 229)

■

dead-interval

< 1 to 65535 > -- Set dead interval in seconds; the default is 40.

(p. 229)

■

hello-interval

< 1 to 65535 > -- Set hello interval in seconds; the default is 10.

(p. 236)

■

priority

< 0 to 255 > -- Set priority of this router as a designated router.

(p. 265)

■

retransmit-interval

< 1 to 3600 > -- Set retransmit interval in seconds; the default is 5.

(p. 273)

■

transit-delay

< 1 to 3600 > -- Set transit delay in seconds; the default is 1.

(p. 279)

■

[no] interface vlan

VLAN-ID

ip rip

IP-ADDR

Specify the IP address the request is for.

Next Available Options:

■

authentication-type

< none | text > -- Set authentication type used on this interface.

(p. 224)

■

authentication-key

-- Set RIP authentication key (maximum 16 characters).

(p. 223)

■

metric

< 1 to 15 > -- Set metric for this interface.

(p. 250)

■

poison-reverse

-- Enable/disable poison reverse on this interface.

(p. 262)

■

receive

< V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming packets.

(p. 273)

■

send

< disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing packets.

(p.

275)

■

rip-compatible

< V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and outgoing

packets.

(p. 274)

242

2009 Hewlett-Packard Development Company, L.P.

interface

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands