Next Available Options:
■
-- Specify the VLAN to use as a source for Candidate-BSR router IP address
(PIM-SM must be enabled on this VLAN). (VLAN-ID)
■
< 1 to 32 > -- Specify the length (in bits) of the hash mask.
■
< 0 to 255 > -- Specify the priority for the Candidate Bootstrap router.
■
< 5 to 300 > -- Specify the interval for sending Bootstrap messages on PIM-SM
interfaces.
chain-name
■
router ospf area
OSPF-AREA-ID
virtual-link
IP-ADDR
md5-auth-key-chain
CHAIN-NAME
Specify key chain to use for MD5 authentication.
■
router ospf area backbone virtual-link
IP-ADDR
md5-auth-key-chain
CHAIN-NAME
Specify key chain to use for MD5 authentication.
cost
■
router ospf area
OSPF-AREA-ID
stub
< 0 to 16777215 >
Enter cost to use when injecting default routes
into the area.
Range: < 0 to 16777215 >
■
router ospf area backbone stub
< 0 to 16777215 >
Enter cost to use when injecting default routes
into the area.
Range: < 0 to 16777215 >
dead-interval
■
router ospf area
OSPF-AREA-ID
virtual-link
IP-ADDR
dead-interval
< 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■
router ospf area backbone virtual-link
IP-ADDR
dead-interval
< 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
default-metric
■
router ospf default-metric
< 0 to 16777215 >
Usage: default-metric <0-16777215>
Description: The default metric used for advertising external routes imported
into OSPF by this router.
Range: < 0 to 16777215 >
■
router rip default-metric
< 1 to 15 >
Usage: default-metric <1-15>
478
©
2009 Hewlett-Packard Development Company, L.P.
router
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......