User Addendum
Fiery EXP250 Color Server, version 1.0SP1
for DocuColor 240/250
Part Number: 45054549
28 February 2006
Copyright 2006 © Electronics for Imaging, Inc.
This addendum describes how to upgrade the Fiery EXP250 Color Server system software
to include features that were not covered in the version 1.0 release. The document also
supplements information in the user documentation about installable options and
Fiery EXP250 user software.
Before using the Fiery EXP250, read this
User Addendum
and distribute copies to all users.
For all other information and instructions, see the documentation that accompanies your
Fiery EXP250.
N
OTE
:
The term “Fiery EXP250” is used in this document to refer to the Fiery EXP250 Color
Server. The Fiery EXP250 supports the DocuColor 240/250. The term “copier” is used in
this document to refer to the DocuColor 240/250.
New features in
this update
This document contains information about the following:
• Upgrade of Fiery EXP250 system software
Instructions are provided for installing the system software update in several ways. For
more information, see “Upgrading system software” on page 2.
• Installation of printer drivers
The EXP250 SP1 System Software Update CD also includes printer drivers that you must
install to use the Tray 6 (Oversized) option. For more information, see “Upgrading printer
drivers” on page 7.
• Mac OS X printer driver choice
In addition to supporting the new Tray 6 (Oversized) option, the Mac OS X printer driver
in the system software upgrade also addresses issues on OS X v10.3 and v10.4.1 with
finisher options for folding and stapling. For more information, see “Two versions of Mac
OS X printer driver” on page 10.
• Cancel on Mismatch
A job whose media is not available can be cancelled after a specified timeout. See page 11.
• Support for Tray 6 (Oversized) option
Tray 6 (Oversized) is a new installable option that accommodates larger paper than the
regular Tray 6 option. For more information, see “Tray 6 (Oversized)” on page 11.
