HP 6200YL Reference Manual Download Page 205

Page: 205 / 765

■

mac-address-count -- Mac address count.

■

mac-moves -- MAC Moves.

■

pkts-to-closed-ports -- Packets to closed TCP/UDP ports.

■

port-auth-failures -- Port authentication failures.

■

system-resource-usage -- System resource usage.

■

system-delay -- System Delay.

Next Available Options:

■

threshold-value

< low | med | high > -- Set the threshold Value.

(p. 203)

■

limitValue

< 1 to 2147483647 > -- Set the threshold Value. (NUMBER)

(p. 200)

sizeInMB

■

instrumentation memory

< 1 to 255 >

Usage: instrumentation memory <sizeInMB>

Description: Sets the maximum size in MB which may be used by

instrumentation.

Decreasing the size will result in the loss

of previuosly collected data.

Range: < 1 to 255 >

threshold-value

■

instrumentation monitor

< all | arp-requests | ip-address-count | ... > < low | med | high >

Set the threshold Value.

Supported Values:

■

low -- Low threshold.

■

med -- Medium threshold.

■

high -- High threshold.

trap

■

[no] instrumentation monitor trap

Enables/Disables SNMP trap generation.

203

2009 Hewlett-Packard Development Company, L.P.

instrumentation

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands