Set list of values used to select this entry from snmpNotifyTable.
■
snmpv3 targetaddress
TARGETADDRESS
params
PARAMS IPV6-ADDR
taglist
TAGLIST
Set list of values used to select this entry from snmpNotifyTable.
tagvalue
■
snmpv3 notify
NOTIFY
tagvalue
TAGVALUE
Set tag value that selects entries in the snmpTargetAddr table.
targetaddress
■
[no] snmpv3 targetaddress
TARGETADDRESS
Configure SNMPv3 Target Address entry.
Next Available Option:
■
-- Set parameter name. (ASCII-STR)
timeout
■
snmpv3 targetaddress
TARGETADDRESS
params
PARAMS IP-ADDR
timeout
< 0 to 2147483647
>
Set time-out value; default is 1500.
Range: < 0 to 2147483647 >
■
snmpv3 targetaddress
TARGETADDRESS
params
PARAMS IPV6-ADDR
timeout
< 0 to 2147483647
>
Set time-out value; default is 1500.
Range: < 0 to 2147483647 >
udp-port
■
snmpv3 targetaddress
TARGETADDRESS
params
PARAMS IP-ADDR
udp-port
TCP/UDP-PORT
Set UDP port number to which the messages are sent; default is 162.
■
snmpv3 targetaddress
TARGETADDRESS
params
PARAMS IPV6-ADDR
udp-port
TCP/UDP-PORT
Set UDP port number to which the messages are sent; default is 162.
user
■
[no] snmpv3 group
< ManagerPriv | ManagerAuth | OperatorAuth | ... >
user
USER
Set user to be added to the group.
Next Available Option:
■
< ver1 | ver2c | ver3 > -- Set security model to be used.
■
snmpv3 params
PARAMS
user
USER
Set user that the switch will send messages on behalf.
632
©
2009 Hewlett-Packard Development Company, L.P.
snmpv3
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......