HP 6200YL Reference Manual Download Page 655

Page: 655 / 765

Enables or disables the PVST protection feature on the port or range of ports specified.

The

command indicates which ports are not expected to receive any PVST BPDUs.

Default: Disabled on all ports

reset

■

spanning-tree pending reset

Copy active configuration to pending.

root-guard

■

[no] spanning-tree

[ETHERNET] PORT-LIST

root-guard

Set port to ignore superior BPDUs to prevent it from becoming Root Port.

tcn-guard

■

[no] spanning-tree

[ETHERNET] PORT-LIST

tcn-guard

Set port to stop propagating received topology changes notifications

and topology changes to other ports.

trap

■

[no] spanning-tree trap

< errant-bpdu >

Enable/disable STP traps.

Supported Values:

■

errant-bpdu

vlan

■

spanning-tree instance

< 1 to 16 >

vlan

Configure VLANs for the MST instance.

Next Available Option:

■

VLAN-ID-RANGE

-- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)

(p. 653)

■

spanning-tree pending instance

< 1 to 16 >

vlan

Configure VLANs for the MST instance.

Next Available Option:

■

VLAN-ID-RANGE

-- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)

(p. 653)

VLAN-ID-RANGE

■

[no] spanning-tree instance

< 1 to 16 >

vlan

VLAN-ID-RANGE

VLAN(s) to add to or to remove from the MST instance

653

2009 Hewlett-Packard Development Company, L.P.

spanning-tree

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands