HP 16533A, User Reference, Page: 113 / 152

Action Field
The Action field is a toggle field that toggles between Replace and Insert.
These options let you choose to replace or to insert an input channel in the
waveform display area.
In single-card modules the waveform display shows input 1 as yellow and
input 2 as green. If two cards are connected as one module, the second card
input 1 is shown as blue and input 2 is shown as green.
Replacing a Channel
Touching the Action field in the Waveform Selection pop-up causes the
Action field to toggle between Insert and Replace. To replace a channel, you
touch the Action field to toggle it to Replace.
Turning the knob slightly in each direction controls which input channel in
the channel label field is highlighted in white. The channel highlighted in
white is the channel that will be replaced. You replace the channel
highlighted in white with the channel you touch in the Labels field.
Inserting a Channel
Inserting an input channel works similar to replacing a channel. Touching
the Action field in the Waveform Selection pop-up causes the Action field to
toggle between Insert and Replace. To insert a channel, you touch the
Action field to toggle it to Insert.
Turning the knob slightly in each direction controls which input channel in
the channel label field is highlighted in white. The channel you insert will be
inserted below the channel highlighted in white. To insert a channel, you
touch the channel in the Labels field that you want to insert below the
channel highlighted in white.
The Waveform Selection Menu
Action Field
9-9