HP 16533A, User Reference, Page: 108 / 152

Module Field
The Module field in the waveform selection menu lets you select waveforms
from more than one module when you are making intermodule
measurements.
Selecting a Module in the Module Field
If you are running your modules in the mainframe independently, and you
touch the Module field, the name of the module you are currently running
will be displayed as the only option in the pop-up menu. When you touch
that field, the message "Data correlatable only for modules under group run"
is displayed. This will remind you that this field is only used in intermodule
measurements.
If you are running intermodule measurements and you touch the Module
field, the name of the modules you are running as part of the intermodule
measurement will be displayed as options in the pop-up menu. The input
labels for the module that you select from the pop-up menu will appear in
the Labels field. Using the Action options (Replace and Insert) and the
Delete option, you can select the input, or inputs, you wish to view, and
where you wish to place them on the screen.
You can select up to 96 waveforms or combinations of waveforms for
viewing on the display. You can view up to eight waveforms in the display
area at any one time. To view selected waveforms that are off the screen,
you touch the field to the left of the waveform display area to turn it light
blue. Then use the knob to scroll through the waveforms to find the one you
want displayed.
The Waveform Selection Menu
Module Field
9-4