horsch LEEB PT 330, Operating Instructions Manual

Page: 25 / 203

1.9 Working in the vicinity
of high voltage power
lines
Be extra cautious when working under or within
the range of high voltage power lines.
WARNING
Danger of electric accidents by touching high
voltage power lines or voltage transfer via the
spraying boom!
¾
The total height of 4 m can also be consider-
ably exceeded during field work. This can
occur with lifted parallelogram and angular
actuated boom wings.
Assess the situation before starting work.
¾
If you have to pass under overhead lines, you
must ask the owner of these overhead lines
about their rated voltage and minimum height.
¾
The safety distances specified in the table must
under no circumstances be fallen short of.
Rated voltage Safety distance from
overhead lines
[kV] [m]
up to 1 1
1 to 110 2
110 to 220 3
220 to 380 4
1.10 Phone and radio
equipment
Phones and radio equipment not connected to
an external aerial can disturb the function of
the vehicle electronics and thus endanger the
operational safety of the vehicle.
1.11 Danger caused by
residual energy
Pay attention to the occurrence of mechanical,
hydraulic, pneumatic and electric/electronic resid-
ual energies on the machine. Apply appropriate
measures when instructing operating personnel.
You will find detailed notes in the corresponding
chapters of the operating instructions.
1.12 Cleaning and waste
disposal
Handle and dispose of used materials and
substances in a professional way (see chapter
“Waste disposal of crop protection sprayer”).
This applies in particular for work on the lubri-
cation system and facilities and when cleaning
with solvents.
NOTE
Do not clean new machines with a steam jet of
a high pressure cleaner. The paint takes ap-
prox. 3 months to cure and could be damaged
before this time.
25