horsch LEEB PT 330, Operating Instructions Manual

Page: 24 / 203

1.7 Unauthorized conver-
sion and manufacture of
spare parts
WARNING
Danger of crushing, cutting, being caught,
being pulled in and impact caused by the
breakage of load bearing components.
The following is generally prohibited:
¾
drilling in frame and undercarriage
¾
enlargement of existing bore holes on frame
and undercarriage
¾
welding on load bearing parts
Conversions or changes to the machine are only
permitted in agreement with the manufacturer.
Original spare parts and authorized accessories
serve your safety.
This also applies for welding work on load bear-
ing components.
The use of parts other than the ones specified
may result in the rejection of liability for result-
ing damage.
Use only conversion and accessory parts ap-
proved by HORSCH LEEB AS GmbH, e.g. to
maintain the validity of the type approval as per
national and international regulations.
The following machines must be in a condition
that is determined by the corresponding accept-
ance or approval:
¾
Vehicles with a governmental type approval.
¾
facilities and equipment connected with a ve-
hicle with a valid type approval or an approval
for road traffic.
1.8 Spare parts and wear
items as well as auxiliary
materials
Machine parts in unacceptable condition
must be replaced immediately.
Use only original HORSCH LEEB AS spare parts
and wear items, to maintain the validity of the
type approval as per national and international
regulations.
When using spare parts and wear items from
third parties it cannot be ensured that these
have been designed and manufactured under
the aspects of expected loads and safety.
HORSCH LEEB AS GmbH does not assume
liability for damage resulting from the use of
unapproved spare parts and wear items or
auxiliary materials.
24