horsch LEEB PT 330, Operating Instructions Manual

Page: 78 / 203

4.13.7 Air cooling
2 1
¾
Press button (1) to activate/deactivate air
cooling.
Press button (1) for a short while to activate/
deactivate the automatic air conditioning control.
With activated air cooling, the symbol (2) ap-
pears in the display.
With deactivated air cooling the symbol (2) is
no longer displayed, if the nominal temperature
can be achieved without air cooling. If this is not
true, symbol (2) will start flashing.
4.13.8 Setting the fan power
1 2
3
¾
Press button (1) to reduce the fan power by
one stage (3).
¾
Pressing the button (1) longer switches the
fan to stage 0 (0%) with 2 seconds.
¾
Press button (2) to increase the fan power
by one stage
¾
Pressing the button (2) longer switches the
fan to stage 7 (100%) with 2 seconds.
Fan power 0 (left) and 7 (right)
4.13.6 Automatic control of the air
conditioning system
1
2 3
¾
Press button (1) to activate/deactivate the
automatic air conditioning control.
For optimal driving comfort, the following param-
eters are controlled by the system:
•
The blowing air quantity
•
The cooling or heating of the air
•
The direction of the air flow
•
The proportion of air circulation (75% by
standard)
Enter the desired cabin temperature into the
system:
¾
Press button (2) to reduce the nominal tem-
perature value
¾
Press button (3) to increase the nominal tem-
perature value
The automatic control of the air conditioning
system is deactivated if the following settings
are changed:
•
Fan power
•
Activation of air cooling
•
Activation of air circulation
•
Changing the flow direction
The automatic control of the air conditioning
system is activated again by pressing the but-
ton (1). In case of deactivation all parameters
are saved.
78