horsch LEEB PT 330, Operating Instructions Manual

Page: 168 / 203

14.4 Operating materials carrier vehicle
Filling points Filling
quantity *
Type *** Change interval **
Engine
(with filter)
approx.
29 l
10W40 "MB228.5" after 500 operating hours and sub-
sequently after 500 operating hours.
(min. 1x per year)
Wheel drive approx.
4 x 2.6 l
Synthetic gear oil
75W140
after 100 operating hours and sub-
sequently after 500 operating hours.
(min. 1x per year)
Windscreen wipers approx. 4 l fill up to max. level.
Hydraulic system
oil change quantity
with max. filling
approx.
150 l
Hydraulic oil HVLP-46 after 500 operating hours
and subsequently after 1500
operating hours. (min. 1x per year)
Fuel tank approx.
680 l
Diesel fuel ****
DIN EN 14214
after work and fill up as required
Cooling system approx.
43 l
Mixture of clear, soft
water and coolant “MB
135.0”
replace engine coolant after
3 years
Compressed air
system
Lubricator Check daily for water content
Air conditioning
system
1.3 kg R 134a every 3 years
Lubrication points,
see lubrication
chart
up to max.
level:
Lithium saponified
grease, NLGI-class2
(worked penetration
number 265-295)
See lubrication chart; lubricate all
other bearings and joints regularly
with oil
* The inspection by means of dipstick or other fluid measuring facilities is decisive for the amount to be filled in
** Time limited by the value reached first
*** Approved brand designations, as far as determined: See current list of fuels and lubricants, which is available in authorized
workshops in form of service information.
**** In case of a sulphur content higher than 1% in the diesel fuel, the oil change intervals must be halved. A sulphur content of
0.05% is recommended, but sufficient lubrication abilities (e.g. by additives) must be confirmed by the fuel supplier. Alternative
fuels, e.g. RME, only after consultation with authorized workshops.
168