Data Management
64
Execution confirmation for [Save Settings]
This is a confirmation message for saving the settings of the main unit to a USB memory stick.
Fig. 64 Execution confirmation for [Save Settings]
The buttons and button functions, which can be used with the execution confirmation for [Save
Settings] appearing, are described in the table below.
Table 15 Button functions with execution confirmation
for [Save Settings]
If the ENT button is pressed, the settings of the main unit are saved to a USB memory stick as
a .cfg file.
The data ID and data value are indicated as text for each setting item category in the file.
Saved items are shown in the table below.
Button
Function
Page
ENT button
Saves the settings of the main unit to a USB memory stick.
-
ESC button
Closes the message.
-
Setting item category
Item (data ID)
Description
Page
MeasureSetting
ExtractTime
Extraction time
page 72
LayerSeparationTime
Separation time
page 72
FillSampleTime
Cell filling time
page 73
MeasureLimitTime
Measurement limit time
page 73
DrainTime
Drainage time
page 74
PurgeNum
Numbers of purges
page 74
StabWaitTime
Not used on this product.
-
MeasMode
Measurement mode
page 75
ConvertionType
Measurement unit
page 75
SolventVolume
Solvent volume
page 76
SampleVolume
Sample volume
page 76
ZeroShift
Zero shift value
page 77
fl_ExtractLight
Use of extraction layer light source
page 77
MeasTrig
Not used on this product.
-
DataLog
Save confirmation setting
page 78
fl_Memo
Memo Saving setting
page 78
fl_Minus
Display setting for negative value
page 79
fl_RawData
Display setting for raw data
page 79
