horiba OCMA-500, Instruction Manual

Page: 38 / 141

Basic Operation
18

Character keys
This screen is used to enter names of memo data such as measurement conditions.
If [Save Memo] is set to "ON" in the measurement settings, this screen appears immediately
before measured values are saved.
Reference
"Save Memo" (page 78)
Fig. 21 Example of character key pop-up screen
The buttons and button functions, which can be used with a character key pop-up screen
appearing, are described in the table below.
Table 4 Operable buttons with a character key pop-up screen
Follow the steps below to change a setting.
1. Press the up/down/left/right button to select a character key.
The selected key is shown in red.
2.
Press the ENT button.
The selected character appears in the input box.
3.
Repeat steps 1. to 2. to enter the desired characters in the input box.
4.
Press the up/down/left/right button to select the [ENT] key, and press the ENT
button.
The characters that appear in the input box are applied.
Button Function
ENT button Applies the currently entered value and closes the screen.
Up button Selects the next key up.
Down button Selects the next key down.
Left button Selects the next key to the left.
Right button Selects the next key to the right.
ESC button Cancels changes and closes the screen.