Measurement
47
9.
Press the ENT button.
Measurement starts.
The elapsed time is shown (counting up). When measurement ends, the measured value
appears.
Fig. 48 Manual measurement - Measurement
Tip
If [Confirm Save] is set to "MANUAL", the operation guide display will show [ENT: Save ESC:
Skip]. To save the measured value, press the ENT button. To skip, press the ESC button. For
details on the [Confirm Save] setting, refer to "Confirm Save" (page 78).
If [Save Memo] is set to "ON" in the measurement settings, a pop-up screen to input the data
name will appear immediately before the measured value is saved. To save the measurement
conditions or other memo with the measured value, enter the data name and press the ENT
button. To save only the measured value and not an additional memo, press the ESC button. For
details on the [Save Memo] setting, refer to "Save Memo" (page 78). For details on the pop-up
screen to input the data name, refer to "Character keys" (page 18).
If measurement ends normally, the measured value is held.
The operation guide display shows [ESC: Return].
Fig. 49 Manual measurement - Result
10.
Press the ESC button.
The instantaneous value measurement screen returns.
11.
Execute drainage referring to "Screen operations in the manual measurement/
calibration mode" (page 14)
at any time.
12.
Press the ESC button.
The start state of the manual measurement mode returns.
