Basic Operation
16
Using pop-up screens
A pop-up screen for selection or entry will appear when it is necessary for you to select an
item or enter a number or characters when configuring settings or performing other
operations. If [Save Memo] is set to "ON" in the measurement settings, a pop-up screen will
appear for entering the data name, before measured values being saved.
The procedures for using the pop-up screens are explained below.
Selection list display
This screen is used to configure settings. Values that can be selected are shown in a list.
Reference
" Setting " (page 69)
Fig. 19 Example of selection list pop-up screen
The buttons and button functions, which can be used with a selection list pop-up screen
appearing, are described in the table below.
Table 2 Operable buttons with a selection list pop-up screen
Follow the steps below to change a setting.
1.
Press the up or down button to select the desired value.
2.
Press the ENT button.
The selected value is applied.
Button
Function
ENT button
Applies the currently selected setting and closes the screen.
Up button
Selects the next item up.
Down button
Selects the next item down.
ESC button
Cancels changes and closes the screen.
