Product Outline
5
Note
Always keep the right cover closed during measurement. Stable measurement cannot be performed
when the right cover is open.
Operation buttons
Fig. 4 Operation buttons
No.
Name
Image
Description
1
DATA button
Press this button to open the Data Top screen
(refer to "Data Top screen" (page 57)).
2
CAL button
Press this button with the Measurement Top screen appearing to move to the
automatic zero calibration mode or manual zero calibration mode, depending on the
calibration mode setting (refer to the chapter "Calibration" (page 24)).
3
MEAS button
Press this button to move to the currently set measurement mode
(refer to the chapter "Measurement" (page 34)).
4
SET button
Press this button to move to the Setting Top screen
(refer to "Setting Top screen" (page 69)).
5
Up button
Press this button to change selections. The item above the currently selected item will
be selected.
In the manual mode, press this button to open and close the fill cell valve
(refer to "Screen operations in the manual measurement/calibration mode" (page 14)).
6
Right button
Press this button to change selections. The item to the right of the currently selected
item will be selected.
If there is the next page, the next page will be displayed.
In the manual mode, press this button to switch the stirring motor ON and OFF
(refer to "Screen operations in the manual measurement/calibration mode" (page 14)).
7
Left button
Press this button to change selections. The item to the left of the currently selected
item will be selected.
If there is the previous page, the previous page will be displayed.
8
Down button
Press this button to change selections. The item below the currently selected item will
be selected.
In the manual mode, press this button to open and close the drainage valve
(refer to "Screen operations in the manual measurement/calibration mode" (page 14)).
