horiba OCMA-500, Instruction Manual, Page: 95 / 141

Setting
75

Meas. Mode
Use this screen to set the measurement mode.
Fig. 78 Meas. Mode screen
The following settings are available. The default setting is "AUTO".
For the buttons and functions, which can be used with this screen appearing, refer to Table 2
(page 16).

Measurement Unit
Use this screen to set the units of measured values.
Reference
"Conversion of measurement units" (page 112)
Fig. 79 Measurement Unit screen
The following settings are available. The default setting is "mg/L".
For the buttons and functions, which can be used with this screen appearing, refer to Table 2
(page 16).
Selection Description
AUTO If the MEAS button is pressed, the automatic measurement mode is entered.
SEMI-AUTO If the MEAS button is pressed, the semi-automatic measurement mode is entered.
MANUAL If the MEAS button is pressed, the manual measurement mode is entered.
Selection Description
mg/L Shows measured concentration values in units of mg/L.
mg/kg Shows measured concentration values in units of mg/kg.
mg/g Shows measured concentration values in units of mg/g.
mg/PC Shows measured concentration values in units of mg/PC.