Measurement
51
Cleaning start condition
The automatic cleaning is performed according to the following conditions.
Cleaning operation conditions
Cleaning and associated operations
CLn Cleaning start type
Internal
cleaning cycle
During
cleaning:
Waiting: -
External
contact input
ON:
OFF: -
Cleaning
operation
*1
ON:
OFF: -
CLn
Contact
output
*2
ON:
OFF: -
HoLd
Contact
output
*3
ON:
OFF: -
Transmission
output
yES
nor
Started only by
internal timer
*4
-
-
-
-
-
-
-
-
-
Measurement
value
or
Started by both
internal timer and
external commands
*4
-
-
-
-
-
-
-
Measurement
value
And
Started by internal
timer when external
command is ON
*4
-
-
-
-
Measurement
value
-
-
-
-
-
-
-
-
-
trg
Started by external
trigger
No setting
ON for 2 s
*4
-
-
-
-
Measurement
value
no
No setting
No setting
-
-
*4
-
-
-
-
Measurement
value
*1: When the “Automatic cleaner operation setting” setup menu is set to “yES”, the cleaning operation is performed
according to the specified method (
). Cleaning is not performed when it is to be started during zero calibration.
*2: The “CLn” contact is output for the specified hold time during and after cleaning. (
)
*3: There are two types of “HoLd” contact output: 1. “HoLd” contact is output for the specified hold time during and
after cleaning (
), and 2. “HoLd” contact is output when the external contact input is ON (
).
*4: The transmission output is issued according to the settings in the “Transmission output hold setting” setup menu.
