horiba HU-200TB-W SS-120-W, Instruction Manual

Page: 45 / 109

Operation
33
Ein1 External input 1 (calibration/hold) 46
tyPE
Selection of command by
contact (calibration/hold
command)
When external input 1 is a calibration
command (“Setting of automatic zero
calibration start method” is set to “or”, “And”, or
“trg”), if this contact is closed, zero calibration
and its associated operations will be started
automatically.
Note:
The following display cannot be changed.

When “tyPE” of Automatic zero calibration
setting is set to “nor” (internal timer only),
“HoLd” is displayed

When “tyPE” of Automatic zero calibration
setting is set to “or”, “And”, or “trg”, “CAL” is
displayed
CAL, HoLd - 46
rE
Setting for reversing logic
of hold command
(calibration/hold command) When “tyPE” of Automatic zero calibration
setting is set to “nor”, the logic of the
calibration/hold command is reversed.
yES, no no 46
Ein2 External input 2 (cleaning/hold) 47
tyPE
Selection of command by
contact (cleaning/hold
command)
When external input 2 is a cleaning command
(“tyPE” of Cleaning operation setting is set to
“or”, “And”, or “trg”), if this contact is closed,
automatic cleaning and its associated
operations will be started.
Note:
The following display cannot be changed.

When “tyPE” of Cleaning operation setting
is set to “nor” (internal timer only), “HoLd” is
displayed

When “tyPE” of Cleaning operation setting
is set to “or”, “And”, or “trg”, “CLn” is
displayed
CLn, HoLd - 47
rE
Setting for reversing the
logic of hold command
(cleaning/hold command)
When the cleaning start is set to “nor”, the logic
of the cleaning/hold command is reversed.
yES, no no 47
rS RS-485 setting 47
Addr RS-485 address setting Specify the RS-485 communication address. 0 to 99 0 47
Display Item Description
Setting
range
Initial
value
Refer
to page