Measurement
34
Measurement
Measurement mode
1.
Turn the power ON.
The measurement target appears on the main display and the measurement range is
displayed.
After the measurement range is displayed, the measurement starts.
This is the normal measurement mode.
2.
The screen is changed by pressing
/
.
Pressing ENT allows you to check or change the set values during measurement.
To return to the meas mode from a different mode, hold down HOLD or ESC.
Note
Prior to measurement, be sure to calibrate the detector.
Power ON
Displayed for
a few seconds
Meas mode
Detector connection
check
～
Meas mode
Setup menu
If “non” is selected from the “S.diSP” setting items, nothing is displayed in the sub display
section after returning to the meas mode.
Control value setup
screen
Screen displaying the number
of days elapsed since the latest
zero calibration
Changes
the value
Cleaning check screen
Moving average check setup screen
Cleaning operation check screen (display example when or is set)
Calibration data check screen (display example when no is set)
Contact output check setup screen (display example when r1 and AL are set)
Determines
the value
Cancels
the value
Determines
the value
Cancels
the value
Changes
the value
Screen for checking
the amount of light
for zero calibration
Delay time screen
Determines
the value
Cancels
the value
Changes
the value
