Honeywell Intermec PD43 User Manual Download Page 34

Page: 34 / 194

Chapter 1 — About the Printers

PD43 and PD43c Commercial Printer User Manual

Use a Wizard

The available wizards depend on the hardware you have installed in the
printer.

From the Ready screen, press

. The Main Menu appears.

Select

Wizards

and press

Select a category and press

Select a wizard from the list and press

. The wizard begins.

In a wizard:

•

Use or to select items in a list.

•

Press

to select the highlighted item.

•

Select

and press

to continue to the next screen.

About Printer Command Languages

A printer command language is a set of instructions that controls
printer functions:

•

Configure the printer.

•

Return the status of the printer.

•

Control peripheral devices.

•

Format a label or receipt for printing.

The printer supports these command languages and language
simulator support options:

•

Fingerprint

•

Direct Protocol (DP)

•

IPL (Intermec Printer Language)

•

ZSim (ZPL command language simulator)

•

DSim (DPL command language simulator)

•

Smart Printing

Summary of Contents for Intermec PD43



































































































































































































Search results

Summary of Contents for Intermec PD43

Reviews:

Related manuals for Intermec PD43

Brands by name

Popular brands

Honeywell Intermec PD43, User Manual

Search results

Summary of Contents for Intermec PD43

Reviews:

Related manuals for Intermec PD43

Brands by name

Popular brands