Honeywell Intermec PD43 User Manual Download Page 29

Page: 29 / 194

Chapter 1 — About the Printers

PD43 and PD43c Commercial Printer User Manual

About the Main Menu

In the printer Ready screen, press

to view the Main Menu.

Press and to highlight Main Menu items, and then press

select that item:

•

Select

Programs

to see a list of programs installed on the printer.

This list includes utility programs provided as part of the printer
firmware, and programs you have installed on the printer.
The

Programs

item appears in the Main Menu only if the printer

is using Fingerprint or Direct Protocol as the command language.

•

Select

Settings

to view and change printer settings.

•

Select

Tools

to print test labels, manage a connected USB storage

device, restore printer default settings, or save and load printer
profiles.

•

Select

Wizards

to see a list of wizards that help you configure

printing or communication settings, or calibrate the media
sensors.

Main Menu

Programs

Settings

Tools

Wizards

Note:

The printer cannot print while the Main Menu is on the screen.

You need to exit the Main Menu and return to the Ready screen to
begin printing.

Summary of Contents for Intermec PD43



































































































































































































Search results

Summary of Contents for Intermec PD43

Reviews:

Related manuals for Intermec PD43

Brands by name

Popular brands

Honeywell Intermec PD43, User Manual

Search results

Summary of Contents for Intermec PD43

Reviews:

Related manuals for Intermec PD43

Brands by name

Popular brands