Honeywell Intermec PD43, User Manual

Page: 118 / 194

Chapter 4 — Configure the Printer
104 PD43 and PD43c Commercial Printer User Manual
How to Load a Printer Profile with Programming Commands
You can load a saved LCD printer profile to another printer by sending
programming commands directly from your PC to the printer through
a terminal program (such as HyperTerminal), a serial connection, or a
network connection. All commands are case-sensitive.
About USB Storage Device Directories
You can use a USB storage device to install files, such as applications
and fonts on the printer. You need to copy files to specific directories
on the USB storage device so that the printer can properly install them.
Note: To load printer profiles that modify communication settings
that require itadmin rights, you must log in as an itadmin: RUN “su -p
pass itadmin”.
Programming Commands to Load a Printer Profile
Connection Programming Commands
Printer running
Fingerprint RUN “/system/usr/bin/cfg -o xmlimportset -k
/home/user/profiles/myprofile”
Printer running
IPL <STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k
/home/user/profiles/myprofile<ETX>
Telnet connection
over Port 23 /system/usr/bin/cfg -o xmlimportset -k
/home/user/profiles/myprofile
USB Storage Device File Directories
File Type Place in This Directory
Application /apps
Font /fonts
Form/layout /forms
Web form /webforms
Image /images
Display images /display
Configuration profile /profiles
Configuration /config