manualshive.com logo in svg

Honeywell Fusion IV, User Manual, Page: 99 / 150

Share
Download
Honeywell Fusion IV User Manual Download Page 99

 

________________________________________________________________________________________________________ 
Document 800-05305  Rev A 

99 

11/09 

Performing a Preview Search 

 

1.

 

Select a single camera by either turning off all cameras but one or double-clicking 
a displayed image. 

 

2.

 

Select the Preview Search button.  24 images display.  If there is no recorded 
video during a portion of the day, “No Image” will be displayed where the image 

should be. 

 

3.

 

Refine the search by double-clicking on an image to select it.  6 images display. If 
needed, return to the previous 24-image view by right-clicking on an image. 

 

4.

 

Refine the search by double-clicking on an image to select it.  10 images display. 
If needed, return to the previous 6-image view by right-clicking on an image. 

 

5.

 

Double-click an image to select the 1-minute segment of video to play.  A single 
image displays.  If needed, return to the previous 10-image view by right-clicking 
on an image. 

 

6.

 

Use the Play controls to play the video of the selected segment. 

 

7.

 

To exit out of the Preview search with the current image still selected, deselect the 
Preview Search button. 

 
 

 

Summary of Contents for Fusion IV























































































































































Reviews:

No comments