Honeywell Fusion IV User Manual Download Page 126

Page: 126 / 150

________________________________________________________________________________________________________
126

13.

Select the same POS ID selected above on the Communication tab to enable
communication between Honeywell Video Analytics and the Fusion DVR.

After all configurations settings are complete, the object tracking ellipses and alarm
notifications will display on the Live View screen.

Honeywell Video Analytics Modules

Live Monitoring Station

- the user can view the live

processing results.

Forensics Tool

– provides an easy-to-use interface to retrieve

relevant data from the database based on the user defined
query.

Report Generator Tool

– generates statistical event reports

from the ActiveAlert server database.

Configuration Tool

– allows the user to configure the specific

types of events or alarms to detect on each camera.

Launch Honeywell Video Analytics Modules

Click Analytics on the Live View screen.

Click the desired Honeywell Video Analytics module.

Summary of Contents for Fusion IV























































































































































Search results

Summary of Contents for Fusion IV

Reviews:

Honeywell Fusion IV, User Manual, Page: 126 / 150

Search results

Summary of Contents for Fusion IV

Reviews: