manualshive.com logo in svg

Honeywell Fusion IV, User Manual, Page: 144 / 150

Share
Download
Honeywell Fusion IV User Manual Download Page 144

 

________________________________________________________________________________________________________ 
144 
 

FVMS Overview 

 

FVMS software is Multi-Site Management Software; a powerful utility that allows 100 or 
more DVRs to be controlled using one computer.  This software allows you to view live 

video, search saved video, edit and configure setup on each DVR, and import maps of 
buildings and other locations. 
The FVMS software was specifically designed as an Enterprise software solution. 

 

Highlights: 

 

•

 

View Live Video from most computers   

 

•

 

Username and Password protected 

 

•

 

Easy to use graphical interface 

 

 

 

Basics: 

 

In order to log in to the DVR server, a user account must be made for each user. This 
ensures that only authorized personnel are allowed to log in.  In addition, each user 

can be assigned different privileges that allow them or deny them access to different 
functions. 

 

Configuring the Server for Remote Connection 

 

1.

 

Enter Setup on the DVR. 

 

2.

 

Click the Network tab. 

 

3.

 

Clear the Disable Remote Control check box.  

 

Note 

If you are using a Firewall, it may be necessary to adjust the port settings on 

both the DVR and the Firewall.  Contact the Network Administrator for more 
information. 

 

4.

 

Click OK. 

 

5.

 

Make sure a User account is created. Without a user account, the Administrator 
account must be used. 

 

6.

 

The DVR server is now ready to receive incoming connections. 

 

 

Connecting to a DVR 

 

Refer to the Setup section of the FVMS Manual for information on using the FVMS 
Software.  The FVMS Manual can be found on the Fusion Software CD. 

 
 

 

Summary of Contents for Fusion IV























































































































































Reviews:

No comments