Honeywell Fusion IV User Manual Download Page 82

Page: 82 / 150

________________________________________________________________________________________________________
82

Information

The Information tab allows users to define the site code necessary for connecting to

remote software, save comments relative to the DVR and store tech support and
contact number information.

Site Code

A User-specified unique identification name used by other DVR software
to identify the DVR. (Remote, Alarm Monitor, FVMS, Digital Signature
Verifier)

CBSN

Displays the serial number of an internal DVR hardware component.

PTZ

The PTZ Setup enables PTZ cameras, creates Presets, Tours, and adjusts speed
settings. Many options listed here are features only available on selected cameras.

Refer to the Advanced PTZ chapter in this manual for description on setting up a PTZ
camera and PTZ options.

User-Defined Contact Numbers

Current Server Software Version

Total HDD /Available HDD

Enter comments

Summary of Contents for Fusion IV























































































































































Search results

Summary of Contents for Fusion IV

Reviews:

Honeywell Fusion IV, User Manual, Page: 82 / 150

Search results

Summary of Contents for Fusion IV

Reviews: