Honeywell Fusion IV User Manual Download Page 74

Page: 74 / 150

________________________________________________________________________________________________________
74

Network Setup

Caution

Do not join this DVR to a Network Domain. Domains force policies that can

negatively affect the DVR. Domains, by default, require the user to press
CTRL-ALT-DEL to login, however this keyboard combination is disabled on
the local DVR and the software will not be able to load.

Network Setup

Time Out Value

When attempting to connect to the DVR, if the connection does

not succeed during the timeout period (seconds), the
connection will be terminated.

Emergency Port

Used to connect to the Alarm Monitor software.

Center Port

Used to connect to the Fusion remote software. This port must
be specified in the Fusion Remote Software to connect to the
DVR.

Note

Center Port 1025 is not available for remote connections. It is used by the
ATI VGA management suite

Image Port

Used to transfer the video to the Fusion remote software.

Search Port

Used to transfer search information to the Fusion remote
software.

Upgrade Port

Used to upgrade software via a remote connection.

Note

If connecting to the DVR through a firewall, the above ports must be open to
incoming and outgoing traffic.

Enable RS-232 Keyboard

Enable 1-way audio from remote client to DVR

Summary of Contents for Fusion IV























































































































































Search results

Summary of Contents for Fusion IV

Reviews:

Honeywell Fusion IV, User Manual, Page: 74 / 150

Search results

Summary of Contents for Fusion IV

Reviews: