________________________________________________________________________________________________________
68
Steps 1-8:
Schedule cameras 1 and 2 to be activated on Sensor # 3 and/or
Sensor #5 which will then activate Relay Output #7 and #13.
1.
Select Sch01 from the Schedule Number list.
(This should already be selected by default.)
2.
Click the Single Day Selection button.
3.
Select the SUN, MON, TUE, WED, THU, FRI, and SAT check boxes.
4.
On the Sch01 line (time selector grid), highlight the hours 00-23 and click Set.
5.
Click Camera buttons #1 and #2 until the Red Sensor buttons are selected.
6.
Click Sensor buttons #3 and #5.
7.
Click Relay buttons #7 and #13.
8.
Click Apply to save.
Step 4
Step 5
Step 1
Step 2
Step 3
Step 6
Step 7
Summary of Contents for Fusion IV
Page 146: ......