Honeywell Fusion IV, User Manual, Page: 81 / 150

________________________________________________________________________________________________________
Document 800-05305 Rev A
81
11/09
SMART Alert
1. Set up the General and Users
tabs first. (see above)
2.
Select the Enable SMART Alarm.
3. Define the number hours
between SMART checks.
4. Select the type of SMART event
to trigger an action.
5.
Define the maximum HDD
temperature.
6. Select an action method.
7. Click Apply.
Alarm Event
1. Set up the General and Users
tabs first.
(see above)
2.
Select the Use Email Alarm
check box.
3. Define the number of minutes
between recording data checks.
4.
Select Motion and/or Sensor to
send and alert on that type of
event.
5. Click Apply.
6. Click Close to return to the
Administration tab.
Data Management
Data Management is available for select
regions where operators must delete data
after a set number of days. If you need to
purge your video data and this feature is
not enabled on your Fusion contact
Technical Support.