Honeywell Fusion IV User Manual Download Page 119

Page: 119 / 150

________________________________________________________________________________________________________
Document 800-05305 Rev A

119

11/09

LDAP Integration

Features

The instructions below are for LDAP Integration with Server Software version 3.6.36
and above.

•

DVR server does not need to be joined to the Domain. The DVR server will query

the LDAP server for accounts and authorization levels.

•

The DVR server creates groups within Active Directory for each of the

permissions on the DVR. Simply join a Domain user to these groups to provide
access to that function in the DVR.

•

DVR access within Active Directory is based on the Site Code within the DVR

software. This allows an administrator to group DVR’s with the same Site Code.

•

Remote and Multi-Site management software works with LDAP logins.

Summary of Contents for Fusion IV























































































































































Search results

Summary of Contents for Fusion IV

Reviews:

Honeywell Fusion IV, User Manual, Page: 119 / 150

Search results

Summary of Contents for Fusion IV

Reviews: