________________________________________________________________________________________________________
50
Creating a Motion Area
Tip
Create up to 15 motion detection areas.
1.
Click the Motion tab in Setup.
2.
Select a camera from the Select Camera list.
3.
Select the Detect Detail Motion Area check box.
4.
Click Clear Motion Area.
5.
Click Advanced Motion Area Setup.
6.
Click a Motion Detection Area shape
button.
7.
Drag the mouse over the camera
image.
Tip
To create a polygon shape,
click the mouse at each point
and double-click to close the
shape.
8.
Click OK.
9.
Move the sliders to adjust motion
sensitivity and the noise filter.
10.
Define the pre-alarm and post-alarm
recording time for a motion event.
Pre Alarm
– 0 > 50 Seconds [The number of seconds the DVR records before motion
is detected]
Post Alarm (MOTION)
– 0 > 50 Seconds [The number of seconds the DVR records
after motion is detected]
Removing a Motion Area
To remove all motion areas, click
.
Summary of Contents for Fusion IV
Page 146: ......