Honeywell AlarmNet 7810iR-ent, Installation And Setup Manual

Page: 52 / 104

7810iR-ent Internet/Intranet Alarm Receiver Installation and Setup Guide
4-30
Action Screen Display
4. Select Use Master Account # button
only if the Master Account number is to be
used as the AlarmNet account. Otherwise,
touch each data field and enter the
required account information.
NOTE: If the Use Master Account #
button is selected, the
Primary Account
information is automatically filled in with the
Master Account Number information. This
information is displayed in gray and cannot
be edited as long as the
Master Account #
button is selected.
5. Use the data entry keypad to enter
required account information.
6. Select
Enable Second CS
to report this
7810iR-ent power-on reset and test
messages to a second CS. Enter the
required account information by touching
each field.
Select the
Options tab.
NOTE: The Secondary Account (backup
receiver) City ID and CS ID must be
identical to the Primary Account (primary
receiver) for the backup receiver to function
properly.
7. Old Alarm Time on 7810iR-ent is only
applicable for power-on reset messages
and test messages.
Fault Time Minutes is not supported by the
7810iR-ent.
Account Supervision s ets the AlarmNet
supervision period.
UL
For UL installations, US UL
Line Sec Account
Supervision must be
selected (max. 200 secs).
ULC
For ULC installations, CN UL
Line Sec Account
Supervision must be
selected (max. 180 secs).