manualshive.com logo in svg

Honeywell AlarmNet 7810iR-ent, Installation And Setup Manual

Share
Download
Honeywell AlarmNet 7810iR-ent Installation And Setup Manual Download Page 102

 

 

 

Regulatory Agency Statements 

 

 

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS 

The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's 

Manual.  Unauthorized changes or modifications could void the user's authority to operate the equipment. 

 

CLASS B DIGITAL DEVICE STATEMENT 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular 

installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

•

  Reorient or relocate the receiving antenna. 

•

  Increase the separation between the equipment and receiver. 

•

  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

  Consult the dealer or an experienced radio/TV technician for help. 

 

INDUSTRY CANADA (IC) STATEMENTS 

This device complies with RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not 

cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired 

operation. 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

 

 

Industry Canada Class B

 

 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet Appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

 

 

ULC STATEMENTS

 

ULC S559-04 ACCESS LEVELS 
Access Level 1:

 By Persons having a general responsibility for safety supervision, who might be expected to investigate and initially 

respond to a fire alarm or trouble indication. 

Access Level 3:

 By persons who are trained and authorized by the manufacturer to:  

i)   Reconfigure the site specific data held within the fire signal receiving centre and systems or controlled by it; and  
ii)   Maintain the fire signal receiving centre and systems in accordance with the manufacturer's published instructions and data."  
 

 

 

 

 

 

Summary of Contents for AlarmNet 7810iR-ent









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands