Honeywell AlarmNet 7810iR-ent, Installation And Setup Manual

Page: 25 / 104

Section 4: Programming
4-3
Action Screen Display
6. For Private LAN configuration, select
Private LAN Only .
Select the Account tab.
NOTE : When Private LAN Only checkbox
is selected or deselected, 7810iR-ent
resets after “Back” or “Home” button is
pressed.
7. Enter
City ID
,
CS ID
and
Sub ID
by
touching each field and using the keypad.
In a Private System, the values for these
fields are not important, however, the same
City ID
and
CS ID
information must be
entered into all 7845i-ent’s being used in
the system. Sub ID must be unique for
each 7845i-ent being used in the system.
Record these numbers.
NOTE: For AlarmNet-i the City ID , CS ID
and Sub ID are provided by AlarmNet. For
Private LAN the City ID and CS ID , the first
two digits must be set to zero. The last two
digits can be set from 00 – FF. The Sub
ID can be set in the range of 0000 – FFFF.
NOTE: For Private LAN configuration, if
changing City ID and/or CS ID, clear the
database after making the changes.
The CLEAR DATABASE option is
located under Central Station, Clear
Database.
NOTE:
Do not select Use Master Account
# or Enable Second CS .
Select Options tab.