Hologic ThinPrep 5000, Operator'S Manual, Page: 274 / 346

M
AINTENANCE
8.18
ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
8
CHANGE FUME EXTRACTOR FILTERS
The fume extractor for the laser etcher has a HEPA filter and a carbon filter to capture particulate
matter and gas and odor. The fume extraction cabin is located inside the waste cabinet door. (See
Figure 8-20.)
The instrument will prompt the user if the HEPA filter needs to be changed. The carbon filter may be
changed on a yearly basis or more often, as desired.
Figure 8-19 Change HEPA Filter Message
Note:
Do not press the Continue button until the filter has been changed.
SECTION
G
Change HEPA filter message.
This message is seen when
prompted by the instrument or
when the
Change Air Filter but-
ton is pressed on the Admin
Options screen.