Hologic ThinPrep 5000 Operator'S Manual Download Page 236

Page: 236 / 346

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual

7.19

PERATING

NSTRUCTIONS

Figure 7-16 Processing Complete Message Window

Press the

button to acknowledge. The Processing Complete screen is displayed.

Figure 7-17 Examples of Processing Complete Screens

The batch reports are available for viewing, printing or saving to USB device. Refer to “Batch
Reports” on page 6.68 for complete details of interpreting a batch report.

To leave this screen and return to the main screen, press the

Done

button.

Processing Complete, no errors. One tray was
skipped due to an unresolved conflict.

Processing Complete, due to operator cancella-
tion of the batch.

Summary of Contents for ThinPrep 5000



























































































































































































































































































































































Search results

Summary of Contents for ThinPrep 5000

Reviews:

Hologic ThinPrep 5000, Operator'S Manual, Page: 236 / 346

Search results

Summary of Contents for ThinPrep 5000

Reviews: